Zhuhai Weemay Print Imaging Products Co., Ltd.

Expert supplier for toner and label tape


Guidance to install HP 134A Toner Cartridges

The HP 134A toner cartridge series is compatible with two home office monochrome laser printers, the HP LaserJet Pro M209dw and HP LaserJet Pro MFP M234dw. These compact and speedy printers are a great buy for any small home office looking to print strictly in black with low operating costs, and we will show the installation process step by step in this post.

Check the Cartridge Toner Level

This printer series does not have a built-in display screen, so you cannot view the cartridge levels directly on this printer, but you can view them on the HP smart app.Select the “supported cartridges” tab in the app to view the estimated cartridge levels. If the cartridge level is low, it’s time to replace the cartridge.

Prepare the Toner Cartridge

Because sometimes toner poder can escape from the cartridge during the unboxing process,it is suggested to open a new HP 13A toner over a trash bin. Remove the toner from the box and take off the cardboard and plastic wrapping that is around the cartridge.

There must be a plastic clip left on the end of the cartridge. This clip protects the cartridge during shipping and the cartridge will not fit in the printer if it is still attached. Remove the clip and discard it. Then gently rock the cartridge back and forth over the trash can to prime the cartridge for the printer.

Replace the HP 134A Toner Cartridge

  • Firstly, pull up on the door on the top of the printer to access the cartridge.
  • Secondly, pull on the cartridge to remove it from the printer.
  • Finally, slide the new cartridge back into the same slot. Close the cover and you can start printing!





Leave a Reply

Leave a message